Contact With Us:

008618339902556

PRODUCTS

Mobile:18339902556
Tel:008618339902556
Fax:0086-371-22859057
QQ:976305993@qq.com
Email:info@blflow.com
Skype:info@blflow.com
Add:3203, Building 19, Jinhe Garden, Kaifeng city, Henan province, China
Whats app: 008618339902556 Wechat: 18339902556
Name:Waste water sludge electromagnetic flow meter water sensor
Place of Origin:Henan, China
Model Number:MGG/KL-GB
Accuracy:0.2 or 0.5
Electrodes material:SUS316L, HB, HC, Ti, Tan, stainless steel coated with tungsten cabide
Signal output:4-20mA, pulse,alarm
Protection grade:IP65, IP68 are optional
Liner material:Neoprene, PTFE, PU, ceramic, FEP and PFA etc
Power supply:220VAC, 24VDC
Communication:odbus, Hart, GPRS

Product Description

Description of integrate electromagnetic flow meter
Kailiu Instrument integrate electromagnetic flowmeters are used to measure conductive liquids with conductivity more than 5 us/cm. KL Integrate lectromagnetic flow meters will connect to MGG/KL converter, or BTU meters.

HTB13WoRRVXXXXaUXFXXq6xXFXXXt.jpg

Application of KL integrate electromagnetic flow meter
>Chilled water, hot water
>Sewage water, waste water, slurry water
>Cement mixture, coal slurry, mining slurry
>Sea water, brine water, hard water
>Chemical water, chemical liquids
>Drinking water, portable water, beverage, milk, juice

Main specification of electromagnetic flow sensor

Accuracy0.2% or 0.5%
Pipe size1/4” to 120”
Medium temperatureMax 160C or 320F
Ambient temperature-20C to 60C, or -5F to 140F
Operating pressureMax 420 bar/6090psi/42Mpa
Lining materialRubber, PTFE, PFA, FEP, hard rubber, ceramic
Electrodes materialSS316L, Hastelloy, Titanium, Tantalum, Platinum-iridio
Connection methodFlange, clamp, thread, insertion, union
Flow range0.01-15m/s
Protection gradeIP68

Calibration test
All MGG/KL electromagnetic flow meters are calibrated to reach 0.5% accuracy by volumetric standards and 0.2% accuracy by mass weighing method standards, which is strictly based on JJG 162-2009 Flow Meter Calibration Regular.

HTB1glE4RVXXXXXJXpXXq6xXFXXXE.jpg_.webp.jpg

Flow transmitter

Signal output4-20mA, pulse, frequency, voltage(0-5V/0-10V)
Communication protocolModbus(RS485/RS232), Hart, Profibus, GPRS, GSM
Power supply85-255VAC, 20-36VDC, Battery power 3.6VDC
Cable connectionTwo-wire, three-wire, four-wire
Protection gradeIP65/IP67
Indicator styleLCD display with back light
Flow unitm3/h, m3/m, m3/s, L/h, L/m, L/s, gal/h, gal/m, gal/s, bbl/h, bbl/m, bbl/s
Shell materialAluminum
Entry cableM20*15, 1/2NPT
Signal terminal typescrewed

Installation guide
Note: Straight pipe should keep 5D on the upstream, and 3D on the downstream(D is inner diameter of pipe).

pic (1).gif

Installation on insulated pipes
When the sensor was installed on insulated pipes, you should install short metal tube or ground flanges on the two sides, then connect sensor and short metal tube or ground flanges by wire. To some strong corrosive mediums, which can not use short metal tube or ground flanges, you could punch to install ground electrodes on insulated pipes.

water.gif


Hits: 【Print】 

Related Products