Contact With Us:

008618339902556

PRODUCTS

Mobile:18339902556
Tel:008618339902556
Fax:0086-371-22859057
QQ:976305993@qq.com
Email:info@blflow.com
Skype:info@blflow.com
Add:3203, Building 19, Jinhe Garden, Kaifeng city, Henan province, China
Whats app: 008618339902556 Wechat: 18339902556
Name:Insertion type flowmeter water meter
Place of Origin:Henan, China
Model Number:MGG/KL-CC
Accuracy:0.2 or 0.5
Electrodes material:SUS316L, HB, HC, Ti, Tan, stainless steel coated with tungsten cabide
Signal output:4-20mA, pulse,alarm
Protection grade:IP65, IP68 are optional
Liner material:Neoprene, PTFE, PU, ceramic, FEP and PFA etc
Power supply:3.6V battery type
Communication:odbus, Hart, GPRS

Product Description

Description:
MGG/KL-CC integrate type insertion electromagnetic flow meters are applied to measuring volume flow of conducting liquid and slurry in pipeline, widely used to municipal water supply and drainage, industrial engineering, hydraulic engineering, and etc.

HTB1cL2qRVXXXXbRaXXX760XFXXXe.png

CHARACTERS OF MAGNETIC FLOW METER

1. Measuring accuracy will not be influenced by medium temperature, pressure, viscosity, density and physical parameter; as long as the conductivity of measured medium more than 20μs/cm, and indication will not be influenced by conductivity changes.
2. Wide measuring range, the max flow velocity inside pipe could be any set from 0 m/s to 15 m/s, and output signal and flow will be linear relation.
3. Low requirement to upstream and downstream straight pipe and easier to install.
4. Converter uses 16-digit microprocessor, digital signal processing, with characters of rapid calculation speed, high calculation accuracy, strong anti-interference performance and reliable measurement.
5. Using programmable low frequency excitation method, so flow measurement will be more stable and reliable and lower power consumption;
6. It will display double direction flow automatic measurement, forward and reverse accumulative flow, instantaneous flow, velocity, flow percentage, automatic alarm warning and other parameters;
7. Converter faults self-diagnostic and automatic alarm functions: blank pipe testing alarm, high and low limit flow testing alarm, excitation fault alarm and system fault alarm;
8. Using nonvolatile memory to effectively protect setting parameters and measurement parameters;
9. Using big screen back light LCD display, you could read the data clearly in the sun, hard light or night;
10. Strong converter output functions: 4-20mA, 0-10mA, 0-5V, 0-10V, pulse output and frequency output, and RS485, RS232, HART, MODBUS RTU, PROFIBUS and GPRS GSM wireless remote transfer;

HTB1m.6RRVXXXXbLXFXXq6xXFXXXQ.jpg_.webp.jpg

HOW TO CHOOSE LINER OF MAGNETIC FLOWMETER

Liner materialMain performanceApplication
NeopreneGood elasticity and high breaking tenacity,good wearing resistance performance; resist common concentrated acid,alkali and salt.1.Max temperature of medium is 80C;2.mainly used to measure water, sewage, slurry and pulp etc.
PTFEThe chemical performance of PTFE is the most stable in all plastics, and resist boiled hydrochloric acid, sulfuric acid,nitric acid aqua regia, concentrated alkaline and kinds of organic solutions; food degree material.Temperature of medium: -40C to 180C;mainly used to strong corrosive medium like concentrated acid, alkali and sanitary medium.
PU (Polyurethane)With excellent wear resisting property(equals to ten times of natural rubber);but bad acid and alkali resisting property;Max temperature of medium should be less than 80C; used to measure pulp and coal slurry with middle strong abrasion
FEPChemical performance is similar with PTFE, negative pressure resisting property is better than PTFE; food degree material, price is higher.Same with PTFE
PFAChemical performance is similar with PTFE; with good negative pressure resisting property; food degree material, price is higher.Same with PTFE

PRODUCT PARAMETERS

Nominal diameterDN100-DN3000
Power supply36V battery type
Signal output0-10mA/4-20mA 0-5V/0-10V pulse/freq
ElectrodeSUS316L, HB, HC, Ti, Ta and etc
Connection wayThread or flange(Accept customozation)
CommunicationModbus, Hart, GPRS

Installation:

  1. The installation position should be full of liquid.

  2. The internal diameter or perimeter of pipeline should be measured easily, and ovality should be small.

  3. The length of straight pipe on upstream should be more than 10D, and downstream should be more than 5D, D is the diameter of pipeline.

  4. Vertical installation, the sensor should be vertical with axis, the included angle with cross section should be less than 5°.

  5. There are two ways to insert the sensor: 1/4 of the pipe inner diameter or 1/2 of the pipe inner diameter.

  6. Weld the installed base on pipeline correctly, and clean the welding slag of installed base.

  7. Turn off the flow control valve or adopt low pressure of water supply.



Hits: 【Print】 

Related Products